C-121 Constellation Model
The Lockheed C-121 Constellation is a military transport version of the popular Constellation airliner. A total of 332 aircraft were constructed for both the United States Air Force and United States Navy for various purposes, including numerous airborne early warning versions. The C-121 later saw service with smaller civilian operators until 1993. The aircraft was developed after Lockheed’s first attempt at a military version of the Constellation, the C-69, was unsuccessful due to issues with the Wright R-3350 engines. In 1947, Lockheed released a more economical version, the L-749, which featured extra fuel capacity and a more efficient version of the R-3350. The United States Air Force (USAF) then ordered ten L-749A aircraft, designated the C-121A, while the United States Navy (USN) ordered two AWACS versions of the L-749A, designated the PO-1W (later WV-1). The C-121A was primarily used for cargo transport, but was often fitted with 44-seat passenger transport interiors. The USN’s R7V-1, a passenger/cargo convertible version of the L-1049B Super Constellation, was also widely used for various missions, including transporting personnel and cargo, medical evacuation, and supporting Antarctic supply missions. The USAF’s C-121C, based on the L-1049F Super Constellation, was also used for a variety of purposes, including carrying passengers, fully equipped troops, or stretchers. The C-121G, a modified version of the R7V-1, and the C-121J, an R7V-1 redesignated by the USN, were also used by the Air Force. The C-121L was a modified C-121C used for electronic intelligence gathering missions, while the WC-121N was a weather reconnaissance aircraft. The C-121S was a modified C-121C used for special operations, and the VC-121E was a VIP transport version of the C-121C. The C-121 saw service in various conflicts, including the Vietnam War, and was eventually retired in the 1990s.
LOCKHEED MARTIN®, CONSTELLATION®, associated emblems and logos, and body designs of vehicles are either registered trademarks or trademarks of Lockheed Martin Corporation in the USA and/or other jurisdictions, used under license by Squadron Nostalgia
Lockheed Martin® C-121 Constellation®, 172nd AW 183rd AS, 21in Mahogany Scale Model
Fly again with the MS ANG in this Lockheed Martin C-121 Constellation, 172nd AW 183rd AS model. You’ll love the craftsmanship and detail on this wooden model.
- 18 inches
- Made from Mahogany
- US Veteran-Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® C-121 Super Constellation®, Blue Angels 1970, 18″ Mahogany Model
Fly with the Blue Angels 1970 in this hand-crafted Lockheed C-121 Super Constellation Model. Each piece is carefully carved from wood and hand painted to provide a piece you’ll love.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® C-121J Constellation®, VX-6 Puckered Penguins ‘Pegasus’ 1965, 18″ Mahogany Model
Fly with the VX-6 Puckered Penguins ‘Pegasus’ with 1965 livery in this handcrafted Lockheed C-121J model.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121 Constellation® (WV-2 Warning Star) VW-13, 18″ Mahogany Model
Capture what flying with VW-13 was like in this Lockheed EC-121 Super Constellation (WV2 Warning Star) Model.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121 Super Constellation® (WV-2 Warning Star), VW-11, 18″ Mahogany Model
Capture what it was like to fly with VW-11 in this EC-121 Warning Star Model.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121 Super Constellation®, 553rd Reconnaissance Wing (1971), 18″ Mahogany Model
Fly with the 553rd Reconnaissance Wing with 1970s livery in this handcrafted Lockheed EC-121 Super Constellation model.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121 Super Constellation®, VQ-2 Sandeman 18″ Mahogany Model
Recreate your memories from VQ-2 with this replica EC-121 model. Each model is carefully crafted from wood to give you a piece that will always be treasured.
- Length – 16 inches; Width -18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121/WV-2 Warning Star®, VW-13 141311, 18-inch Mahogany Model
Capture what flying with VW-13 in this Lockheed EC-121/WV2 Warning Star Model was like. This 18-inch wooden model is meticulously carved and painted to create a piece that you can proudly display.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121T 79th AWACS, AFRES (1978) Model, Mahogany. 1/82nd (18″) Scale
79th AWACS, AFRES (1978) EC-121T Model Fly with the 79th AWACS, AFRES with 1970s livery in this handcrafted EC-121 model. Each piece is carved from wood and handpainted to provide a piece you’ll love. Length -16 inches Wingspan -18 inches … Read More
Lockheed Martin® L-049 Constellation®, BOAC, 18″ Mahogany Model
BOAC- Lockheed L-049 Constellation Model Fly in the classic BOAC- Lockheed L-049 Constellation Model in this hand crafted recreation. Each model is carved from wood and hand crafted to provide a piece you’ll love. Length – 15 inches Wingspan – … Read More
Lockheed Martin® NC-121k Constellation®, VXN-8 Project Birdseye ‘The Arctic Fox’ 18″ Mahogany Model
Fly with the VXN-8 Project Birdseye ‘The Arctic Fox’ in this handcrafted Lockheed NC-121k Super Constellation Model. Each piece is carved from wood and painted to provide a one-of-a-kind piece.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® NC-121k Constellation®, VXN-8 Project Magnet Paisano Dos, 18″ Mahogany Model
Fly with the VXN-8 Project Magnet Paisano Dos in this handcrafted NC-121K Model. Each model is carved from wood and hand painted to provide a piece you’ll love.
- Length- 18 inches
- Made from Mahogany
- US Veteran-Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® RC-121 552nd AEW & C (1966), 18″ Mahogany Model
Fly with the 552nd AEW and CS with 1960s livery in this handcrafted RC-121D model. Each piece is carved from wood and handpainted to provide a piece you’ll love.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® RC-121D Super Constellation®, 551st AEW and CS (1962), 18″ Scale Model
Fly with the 551st AEW and CS with 1960s livery in this handcrafted RC-121D model. Each piece is carved from wood and handpainted to provide a piece you’ll love.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® VC-121 Super Constellation®, 4435th ATS (Special Air Missions), 18″ Mahogany Model
- 18 inches
- Made from Mahogany
- US Veteran-Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® WC-121 Constellation®, VW-4 Hurricane Hunters 1969, 18″ Mahogany Model
Capture what it was like to fly with the VW-4 Hurricane Hunters in this WC-121 Super Constellation. This 18 inch wooden model is meticulously carved and painted to create a piece that you will proudly be able to display.
- Length – 16 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin®C-121 Super Constellation®, Military Air Transport Service 18″, Mahogany Scale Model
Fly with the MATS Military Air Transport Service again in this handcrafted C-121 Super Constellation Model.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed® L-1049 Super Constellation®, 18″ Mahogany Scale Model
Fly with the Lockheed L-1049 Constellation in this handcrafted wood model. Each model is carefully carved from wood and hand painted to provide a unique piece you’ll love.
- 16″x18″
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® NC-121K Super Constellation®, VAQ-33 Firebirds, 18″ Mahogany Model
Fly with the Firebirds of the VAQ-33 in this hand crafted EC-121 model. Each model is carefully carved from wood and hand painted to provide a piece you’ll love.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121 Super Constellation®, VQ-1 World Watchers, 18″ Mahogany Model
Capture what flying with the VQ-1 World Watchers in this EC-121 Super Constellation was like. This 18 inch wooden model is meticulously carved and painted to create a piece that you can proudly display.
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121 Super Constellation®, VQ-1 World Watchers PR-25. 18 Mahogany. Scale Model
Capture what it was like to fly with the VQ-1 World Watchers in this EC-121 Super Constellation. This wooden model is meticulously carved and painted to create a piece that you can proudly display.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® EC-121 Super Constellation®, VQ-1 World Watchers PR-26 Model, 18″ Mahogany Model
Capture what it was like to fly with the VQ-1 World Watchers in this EC-121 Super Constellation.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® WC-121 Constellation®, VW-1 Typhoon Trackers, 18″ Mahogany Model
Fly with the VW-1 Typhoon Trackers in this handcrafted WC-121 Model. Each model is carved from wood and hand painted to provide a unique piece that will always be treasured.
- Length – 16 inches; Width – 18 inches
- Made from Mahogany
- US Naval Aviator Owned Business
- Officially Licensed by Lockheed Martin
Lockheed Martin® WC-121 Constellation®, VW-4 Hurricane Hunters, 18″ Mahogany.Scale Model
Capture what it was like to fly with the VW-4 Hurricane Hunters in this WC-121 Super Constellation. This 18 inch wooden model is meticulously carved and painted to create a piece that you will proudly be able to display.
- Length – 16 inches
- Wingspan – 18 inches
- Made from Mahogany
- US Veteran Owned Business
- The product is not intended to be used by children 12 years and younger.